Rule 25DA 500 GPH Bilge Pump
$46.92
Rule 25DA 500 GPH Bilge Pump with 500 GPH 12V bilge-pump output with exact current, fuse, hose, strainer, and switch specifications.
The Rule 25DA 500 GPH Bilge Pump is a marine part from Rule for 500 GPH 12V bilge-pump output with exact current, fuse, hose, strainer, and switch specifications.
The practical decision points are voltage, flow rate, fuse size, outlet/hose diameter, installation space, replacement strainer, and switch compatibility.
Product Highlights
- Manufacturer part number: 25DA
- Store SKU: 25DA
- 12V DC
- 500 GPH
- 1.6A at 12V; 1.8A at 13.6V
- 4A
- 3/4 in
- 3.9 in high × 2.9 in wide
- 1231R
Rule 25DA 500 GPH Bilge Pump Specifications
| Brand | Rule |
|---|---|
| MPN | 25DA |
| Voltage | 12V DC |
| Flow | 500 GPH |
| Current | 1.6A at 12V; 1.8A at 13.6V |
| Fuse | 4A |
| Hose diameter | 3/4 in |
| Pump dimensions | 3.9 in high × 2.9 in wide |
| Replacement strainer | 1231R |
| Compatible panel switches | 41, 43, 45, 49 |
| Compatible float switches | 35A, 37A, 40A |
| Pump type | Submersible bilge pump |
What Is Included
- One Rule 25DA 500 GPH Bilge Pump
Fitment and Install Notes
Confirm voltage, flow requirement, hose size/outlet, fuse/wiring, mounting location, service access, and dry-run/priming requirements before installation.
Before You Order
Pick pumps by required flow, voltage, hose/outlet size, and installation space. Match the old pump if replacing an existing unit.
Frequently Asked Questions
What voltage is listed?
The listed voltage is 12V DC.
What should match before ordering?
Match flow, outlet/hose size, voltage, and mounting space.
| Brand | Rule |
|---|---|
| Manufacturer part number | 25DA |
| SKU | 25DA |
| Weight | 0.8000 lbs |
| Dimensions | 7.0000 × 6.7500 × 3.5000 in |
Match the manufacturer part number and the specifications shown on the old component before ordering.
- Confirm voltage, size, mounting points, connector style, and intended marine use where applicable.
- Compare the listing photos and included items with the component being replaced.
- Send the label photo or part number through the part-sourcing form if any identifier is unclear.
Shipping eligibility is checked against the destination and the product logistics record. Unsupported destinations do not receive a checkout method.
